Description
1. ANTI-DRIFT FAN NOZZLE 90° 04 RED TFS
The features of the TFS 90° 04 red anti-drift fan nozzle can be found at the linkASJor see the list of related products by clicking the following link:spare fg.comcategory-product/nozzles/
In essence:
Offrono una buona copertura, migliorando la penetrazione ed il deposito dei prodotti.
The nozzles have the same flow rate as the Standard Fan nozzles, but the droplets are smaller so you get better coverage.
Double outlet nozzle in one body.
The filtration shall be calculated by dividing that of a standard nozzle in half.
Molded in acetal resin, high chemical stability, which gives excellent durability characteristics.
2. PICTOGRAMS RELATED TO THE PRODUCT
3. LIST OF FEATURES FOR ANTI-DRIFT FAN NOZZLE 90° 04 RED TFS
Suitable for fungicides, herbicides, insecticides and herbaceous crop bars.
90° working angle.
The nozzle is suitable for the 402901xx series nozzle head, is available in Blister and is made of durable resin.
It also uses ISO encoding.
The recommended working pressure in bar is between 2 and 4 bar while in psi is between 30 and 60 psi.
The dimensions of the nozzle are 19mm in height and 15mm in diameter
Below is the distribution diagram
AS THE ANTI-DRIFT FAN NOZZLE 90° 04 RED TFS IMPROVES FUNCTIONAL CONTROL AND SPRAYING
ALWAYS ADJUST OR CALIBRATE THE SPRAYER.
Functional control and adjustment of the sprayer are essential to avoid waste of the mixture in the tank at the end of treatment and to achieve good treatment effectiveness.
Equipment for the distribution of agro-pharmaceuticals should be controlled and adjusted, if necessary, to apply the dose of product.
The volume of distribution and the level of spraying of the drops prescribed on the label and specified by the technical assistance services shall be complied with.
Perform the adjustment procedures to define operating parameters such as nozzle type, operating pressure, feed rate, depending on the distribution volume and dose of product that you intend to apply.
The frequency of adjustment depends on the events that occurred since the last adjustment made, such as changing the wheels of the tractor or trailer, changing the on-board computer or nozzles, of the manometer or the execution of maintenance operations related to the hours of use of the machine.
Functional control should, however, be carried out before each use of the sprayer to ensure the correct operation of the equipment.
Field conditions may require these adjustments to be made before processing for example to limit drift or during processing such as width work can be varied to comply with buffer zones or zone of respect.
Manufacturer code: TFS11004
