Description
1. CONE NOZZLE 80° 03 BLUE HCA
The characteristics of the 80° 03 blue HCA cone nozzle can be found at the linkASJor see the list of related products by clicking the following link:spare fg.comcategory-product/nozzles/
In essence:
Vacuum cone nozzle with ceramic insert and acetal resin body.
The jet created by HCA80 ensures optimal coverage while reducing the risk of product drift.
Suitable for use on atomizer.
The external body molded in Acetal Resin, combined with the ceramic insert, gives exceptional durability characteristics.
Suitable for treatment with herbicides, fungicides and insecticides.
2. PICTOGRAMS RELATED TO THE PRODUCT
3. LIST OF FEATURES FOR INJECTION NOZZLE 80° 03 BLUE HCA
Suitable for use on atomizer.
Suitable for fungicides, herbicides and insecticides.
Working angle 80°.
The nozzle is suitable for the 402905xx series nozzle head and is available in Blister.
It also uses ISO encoding.
It is made of ceramic and is made of durable resin.
The recommended working pressure in bar is between 5 and 15 bar while in psi is between 75 and 225 psi.
The dimensions of the nozzle are 21.5mm in height 15mm in diameter
Below is the distribution diagram
HOW TO CONE NOZLE 80° 03 BLUE HCA IMPROVES FUNCTIONAL CONTROL AND
ALWAYS ADJUST OR CALIBRATE THE SPRAYER.
Functional control and adjustment of the sprayer are essential to avoid waste of the mixture in the tank at the end of treatment and to achieve good treatment effectiveness.
Equipment for the distribution of agro-pharmaceuticals should be controlled and adjusted, if necessary, to apply the dose of product.
The volume of distribution and the level of spraying of the drops prescribed on the label and specified by the technical assistance services shall be complied with.
Perform the adjustment procedures to define operating parameters such as nozzle type, operating pressure, feed rate, depending on the distribution volume and dose of product that you intend to apply.
The frequency of adjustment depends on the events that occurred since the last adjustment made, such as changing the wheels of the tractor or trailer, changing the on-board computer or nozzles, of the manometer or the execution of maintenance operations related to the hours of use of the machine.
Functional control should, however, be carried out before each use of the sprayer to ensure the correct operation of the equipment.
To limit the treated band to the target area, use end bar nozzles to treat the margins of the field, in case of aero-assisted sprayers adjust the air velocity and volume appropriately depending on vegetative development.
Field conditions may require these adjustments to be made before processing for example to limit drift or during processing such as width work can be varied to comply with buffer zones or zone of respect.
Manufacturer code: HCA08003
