Description
NOZZLE FLOW METER MTFL03
Items similar to NOZZLE FLOW METER MTFL03 are present in the Ricambi FG e-commerce.
GENERAL FEATURES
Manufacturer Code: MTFL03
Datasheet
Model: SC-1 (23890, patented 8297131)
The flow rate is measured directly at the nozzle in a very short time. The current flow rate in l / min appears on the digital display.
Press the start button and hold the NOZZLE FLOW METER MTFL03 slightly tilted under the nozzle to be measured.
The measurement takes place automatically when filling the measuring tube. When the measurement is finished, the current flow rate appears on the digital display and the NOZZLE FLOW METER MTFL03 can be removed. For further measurements, empty the NOZZLE FLOW METER MTFL03 and press the start button again.
Compare the measured values with the nozzle table or compare the individual nozzles with each other.
Features:
- Rugged, splash-proof plastic case
- Fast measurement
- Measurement accuracy: >2.5%
- Measuring range: 0-3.5 l / min
- Dimensions: 23.5 cm high, ø 5.7 cm
- Weight: 236 g
- Requires 2 LR1 (N) batteries
- Easy to use
WHAT IS THE FUNCTIONAL CHECK OF A SPRAYER MACHINE?
The functional check is a set of checks concerning the sprayer machine. The aim is to evaluate its correct functionality. These operations require the use of special equipment. In addition, a specific test protocol must be followed. In any case, they must be carried out by authorized personnel.
WHY IS IT ESSENTIAL TO HAVE A FUNCTIONAL (AND WELL REGULATED) SPRAYING MACHINE?
Firstly, to obtain considerable savings in plant protection products. This translates into an advantage in terms of money and time (thanks to the reduction in volumes used). Nonetheless, it allows you to accurately distribute the desired volumes and quantities of product. So basically, it improves the effectiveness of the treatment. It also allows you to severely limit environmental pollution. This is also reflected in greater safety for the operator.
WHEN IS IT NECESSARY TO PERFORM CALIBRATION AND ADJUSTMENT OF THE SPRAYER?
It is important to plan carefully the interventions on your equipment. There are many factors that influence this. Changing the wheels of the tractor or trailer, for example; or the replacement of the on-board computer; change of nozzles or pressure gauge; or even the execution of maintenance operations. In any case, the functional check must be performed periodically.
The field conditions may then require that the adjustments be made before treatment. This, for example, to limit drift or to respect border areas.
